Color filter Sticker

Heat resistant color filter sticker for bottle bottom

The color filter is meant to be sticked right below the bottle. You can reach a lot of different colorful effects.
For dark environments it is possible to entirely colorize the transparent Glitter bottles.
As they are "stickers", you can remove them, which is not so easy to do with a permanent paint.

If in doubt, we recommend ordering the lighter shade, e.g. "light blue" instead of "dark blue".
Use light colors more for effects, dark colors more for complete coloring of a clear bottle.
The darker colors are more recommended when using a bright LED.

Mix and match - Buy more than one colour and cut into strips to recreate original vintage colour options. You can try different colours and shapes to create a truly unique effect. Totally removeable without any damage to your bottle.

Gloss (G): The Finish is "Transparent". It works just like our normal Filter Paints, but the Color is more vibrant.

Matt (M): The Finish is "Translucent". Specially recomended for GlitterKit Fast with liquid Color: Orange, Red and Pink. However you get less reflections on your wall.

⚠️IMPORTANT: Depending on the surface of the bottom of the bottle, it is important to blow-dry
the filter onto the glass with a heat gun. Pay particular attention to the middle.
If the surface, where you want to apply the filter, has any stamps, bumps or cavity it NEEDS
to be blow-dried in such a way that no air remains between the filter and the glass.
If necessary pierce a small hole (with a scalpel/knife/sewing needle)
to remove any air so that the filter is firmly attached to the glass.
Video for Installation: Video
Heat resistance:
- do NOT use halogen spotlights
- up to 75W R80 reflector spot for bottles with stamps/bumps
- up to 100W for bottles with a smooth/flat bottom
- only suitable for GOOLAMP lamps